UltraBac Software  

Go Back   UltraBac Software Forum > UltraBac Technical Support > UBDR Pro/Gold
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 06-14-2012, 02:09 PM
Patrick Johnson Patrick Johnson is offline
UltraBac Technical Support
Join Date: Sep 2011
Posts: 25
Default IP Configuration in UBDR

If you need to specify what IP address to use or if you are unable to connect to your DHCP server, you can manually set your ip address in UBDR. There are 2 ways to set the ip address manually, you can use the initial configuration screen or you can set it at command line.

To open a command prompt in UBDR go to: Tools>UBDR>Command Prompt

To view your IP config at command line you can use:

netsh interface ip show config

To manually set your IP address at command line you can use the following command:

netsh interface ip set address name="Local Area Connection" static 1

Change to your desired IP, is your subnet mask, and change to the IP address of your gateway.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are Off
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 06:23 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2001-2019 UltraBac Software